No results were found for the filter!
Gedore Spindle 27 mm, G 3/4", 280 mm, with ball...
Spindle head with drive hexagon and pulse striking surface Nitrocarburized spindle surface, wear-resistant and corrosion-resistant Rolled fine thread, with the same effort - more pressure Quenched and tempered steel according to EN 10083...
From €77.82 *
Gedore Hydraulic pressure spindle 10 t
The pressure piece can be exchanged for a tip and extended if necessary The small pressure spindle is secured against unintentional unscrewing with an anti-twist device
From €450.33 *
Gedore Spindle small for 1.92/1
Hardened spindle surface, wear-resistant Standard thread for quick build-up of strength Quenched and tempered steel according to EN 10083 Note: The spindle thread must be oiled
From €29.88 *
Gedore Spindle 22 mm, G 1/2", 210 mm, with ball...
Spindle head with drive hexagon and pulse striking surface Nitrocarburized spindle surface, wear-resistant and corrosion-resistant Rolled fine thread, with the same effort - more pressure Quenched and tempered steel according to EN 10083...
From €50.74 *
Gedore Spindle 17 mm, M14x1.5, 140 mm, with...
Spindle head with drive hexagon and pulse striking surface Nitrocarburized spindle surface, wear-resistant and corrosion-resistant Rolled fine thread, with the same effort - more pressure Quenched and tempered steel according to EN 10083...
From €38.90 *
Gedore Spindle 14 mm, M12x1.5, 110 mm
Total length [mm]: 140 mm Net weight [g]: 1100 g Net weight [kg]: 1,1 kg Usable thread length [mm]: 110 mm Width across flats 1 [mm]: 14 Spindle thread size: M 12x1,5
From €34.25 *
Gedore Spindle 17 mm, M14x1.5, 50 mm
Rolled fine thread, with the same effort - more pressure Tempered steel according to EN 10083 Dowelled/riveted saddle (tip) Spindle head with hexagonal drive and impact surface Nitrocarburized spindle surface, wear-resistant and...
From €23.35 *
Gedore Industrial pulling set, Add-on system
With this set you can assemble 12 common models with quick release hooks including hydraulic spindles yourself in seconds Ready to hand on a perforated board
From €1,317.24 *
Gedore Pulling set for construction machines,...
For assembling the robust and handy tab puller no. 1.14 and No.1.15 Ready to hand on a perforated board
From €1,252.90 *
Gedore Spindle pressure pads d 25-64 mm
Here, the spindle pressure piece serves as a counter-axis to the puller, in that the spindle now transfers the force to the pressure piece
From €464.81 *
Gedore Spindle 36 mm, G 1", 310 mm
Rolled fine thread, with the same effort - more pressure tempered steel according to EN 10083 the spindle remains smooth-running and clean - no greasing or oiling is necessary towelled/riveted saddle (tip) spindle head with hexagonal...
From €124.51 *
Gedore Spindle 27 mm, G 3/4", 200 mm
Rolled fine thread, with the same effort - more pressure Tempered steel according to EN 10083 Dowelled/riveted saddle (tip) Spindle head with hexagonal drive and impact surface Nitrocarburized spindle surface, wear-resistant and...
From €65.22 *