Close filters
from to
from to
from to
from to
 
  •  
  •  
  •  
from to
1 From 2
No results were found for the filter!
AMF screws for T-slots M6x6x25 mm complete AMF screws for T-slots M6x6x25 mm complete
with DIN 787 screws for T-slots, hexagon nut DIN 6330B and washer DIN 6340 Forged, T-slot guide cleared, stamped with AMF logo and strength class M6 to M12 tempered to strength class 10.9, M14 to M42 tempered to strength class 8.8
From €9.76 *
Piher_53122_schnellspannzange-tga.jpg Piher TGA quick clamp for dog whole tables |...
The Piher TGA quick clamp for dog hole tables | Ø16 mm is your perfect partner for fast and secure clamping. Easy operation and optimal fixation for precise results.
€69.82 *
DIN 6330B.PrintBild..jpg AMF hexagon nuts DIN 6330B M8
Steel, tempered, strength class 10. The flat end can be used with washers DIN 6340
From €0.69 *
510.PrintBild..jpg AMF nut for T-slot rhombus M16x20
The nut for T-slots "Rhombus" enables the additional setting up of a clamping point with the fixture already clamped. It can also be inserted subsequently into an already occupied machine table T-slot. The nut is inserted into the T-slot...
From €11.44 *
DIN 6379.PrintBild..jpg AMF Stiftschrauben für Muttern für T-Nuten,...
€29.34 *
DIN 6379.PrintBild..jpg AMF Stiftschrauben DIN 6379 M8x63 mm
Stiftschrauben für Muttern für T-Nuten gerolltes Gewinde. M 6 bis M12 vergütet auf Festigkeitsklasse 10.9,
From €2.20 *
6830.PrintBild..jpg AMF horizontal clamp 6830 size 0
The horizontal clamp is a high quality and durable tool suitable for a wide range of applications. It is zinc plated and passivated, which gives it high corrosion resistance. The rivets are made of stainless steel and run in...
From €22.80 *
6844.PrintBild..jpg AMF push-pull clamp 6844 size 2
Compression and tension clamps. Long connecting rod guide with fastening thread and nut. Galvanized and passivated. Stainless steel rivets. Fitted screws tempered. Bearings greased. Ergonomic, oil-resistant handle with large hand rest...
From €42.24 *
6832.PrintBild..jpg AMF horizontal clamp 6832 size 0
Galvanized and passivated. Stainless steel rivets running in case hardened bushings on sizes 2 to 5. Bearings greased. Ergonomic, oil-resistant handle with large hand rest and soft components. Loss protection for the pressure screw at...
From €19.16 *
6841.PrintBild..jpg AMF push-pull clamp 6841 size 0
Compression and tension clamps. (Push rod and hand lever parallel). Long connecting rod guide with fastening thread and nut. Galvanized and passivated. Stainless steel rivets running in case hardened bushings on size 2 and 3. Lever parts...
From €48.43 *
1 From 2
Viewed