Inga resultat hittades för filtreringen!
Gedore Skruvmejseleinsatz 1/4" lang...
Execution according to DIN 7422 Square drive according to DIN 3120 - C 6.3, ISO 1174, with ball reception Hand-operated, knurled for a good grip chrome plated
från 13,22 € *
Gedore Skruvmejseleinsatz 1/4" Kugelkopf...
Square drive according to DIN 3120 - C 6.3, ISO 1174, with ball reception Hand-operated, knurled for a good grip chrome plated With pressed-in pin, phosphated Total swivel angle approx. 15-20°
från 11,67 € *
Gedore Skruvmejseleinsatz 1/4" Innen-6-kant 2 mm
Execution according to DIN 7422 Square drive according to DIN 3120 - C 6.3, ISO 1174, with ball reception Hand-operated, knurled for a good grip chrome plated
från 9,81 € *
Gedore Skruvmejseleinsatz 1/4" Kreuzschlitz PZ 1
Square drive according to DIN 3120 - C 6.3, ISO 1174, with ball reception Hand-operated, knurled for a good grip chrome plated Chrome vanadium steel tip, manganese phosphated Tip according to DIN ISO 8764-1 PZ
från 12,45 € *
Gedore Skruvmejseleinsatz 1/2" Kugelkopf...
Square drive according to DIN 3120 - C 12.5, ISO 1174, with ball reception Hand-operated, with handy cross knurling chrome plated With pressed-in pin made of GEDORE vanadium special steel, blued
från 14,46 € *
Veribor® Glaslyftare - suglyftare Aluminium...
Den kvalitativa suglyftaren BO 603.021 av märket Veribor® är den optimala hjälpen för att lyfta och transportera gastäta plåtmaterial. Oavsett material bär suglyftaren en vikt på upp till 100 kg inkl. 2-faldig säkerhetsfaktor. Designen...
94,31 € *
Brandyxa, internationell Modell 2,7 kg 90 cm
length: 90cm weight: 2,7kg Hickory handle Cutting edge protection
53,96 € *
Martor Trimmex Cuttograf
A cutting tool that offers you a whole lot of possibilities? MARTOR has plenty of those. Like the TRIMMEX CUTTOGRAF with which you can cut and deburr effortlessly. We have fitted a 0.40 mm strong blade in this variant which is especially...
7,65 € *
Gedore Skruvmejsel bit - Kör 1/2 "- XZN...
Execution according to DIN 2324 Square drive according to DIN 3120 - C 12.5, ISO 1174, with ball reception Hand-operated, with handy cross knurling chrome plated With pressed-in pin made of GEDORE vanadium special steel,...
från 26,56 € *
Gedore Momentnyckel DREMOMETER DS 3/4" 110-550 Nm
Classified according to DIN EN ISO 6789-2:2017 Type II Class A, incl. traceable test certificate, calibrated to a maximum permissible deviation of +/- 3% and therefore more precise than the +/- 4% required in the standard 3/4" square...
från 1 542,37 € *
Gedore Umschaltknarre 1/2" 270 mm
Feinverzahnt (60 Zähne), mit Umschalthebel und Druckknopfauslösung Rückschwenkwinkel 6° Rutschfester 2-Komponenten-Griff mit Aufhängeloch Für handbetätigte Steckschlüsseleinsätze und Verbindungsteile mit Vierkantantrieb nach DIN 3120 - C...
från 87,99 € *