No results were found for the filter!
FAMAG Set machine drill Bits & Countersink with...
Discover the high-quality FAMAG drill and countersink set, presented in an elegant wooden box. This 3-piece set, consisting of drill bits and countersinks with diameters of 3, 4 and 5 mm, is the ideal tool for precise drilling and...
€68.18 *
FAMAG TCT-Cylinder Boring Bit 60 mm, long
Long version, carbide-tipped with center point, 2 main cutting edges and 2 spurs. Perfect CNC diamond cut. Professional service life thanks to high-quality carbide tipping. From Ø 40 mm with hexagonal shank. Due to the special...
From €153.65 *
FAMAG SUPER-Cylinder Boring Bit OAL90 Ø10
Clean, splinter-free drilling in softwood, including European hardwood and veneered panels. Particularly easy to regrind thanks to straight spurs. Artificial drills are only suitable for stationary use.
From €14.08 *
FAMAG Set machine drill Bits & Countersink 4mm...
The indispensable helper for the clean construction of wooden terraces. Through the pre-drilling you get identically countersunk screw connections. The depth stop is rotationally mounted and thus leaves no annoying marks on the decking...
€28.95 *
FAMAG Bormax 2.0 8 mm ...the ultra fast...
WS Bormax® 2.0! Center point with cutting geometry. Two offset grooved main cutting edges (from Ø 11 mm) and the toothed circumferential cutting edge with longitudinal grooves mean that significantly less feed force is required and...
From €19.74 *
FAMAG Auger Bit, Lewis Pattern 1080x14mm twist...
Milled version form "Lewis" with round spiral groove, thread tip, main cutting edge and top quality taper tap. Version with stepped head and hexagonal shank (from Ø 8 mm) Alloyed tool steel. Due to precise production also suitable for...
From €105.58 *
FAMAG Auger Bit, Lewis Pattern 1000x12 mm twist...
Milled version form "Lewis" with round spiral groove, thread tip, main cutting edge and top quality taper tap. Version with stepped head and hexagonal shank (from Ø 8 mm). Alloyed tool steel. Due to precise production also suitable for...
From €81.18 *
FAMAG Auger Bit, Lewis Pattern 1000x34 mm twist...
Milled version form "Lewis" with round spiral groove, thread tip, main cutting edge and top quality taper tap. Version with stepped head and hexagonal shank (from Ø 8 mm). Alloyed tool steel. Due to precise production also suitable for...
From €148.69 *