Close filters
 
  •  
  •  
  •  
  •  
from to
from to
from to
from to
from to
2 From 6
No results were found for the filter!
ersatzgriff-fuer-maxipress-f-und-r-01.jpeg Piher Ersatzgriff | Maxipress F und R
€7.54 *
progressiv-spannzange-spitz.jpeg Piher Progressive Collet | pointed (8.5 cm)
-Progressive clamp / tension clamp -Does not spring back after actuation -Ideal for fine pressure dosing -E.g. for a fragile glass -Lever can be opened with one finger -Ergonomic
€10.34 *
piher-gleitbugel-maxipress-m-01.jpeg Piher sliding bracket complete | Maxipress M
Isn't it frustrating when a part of your reliable Piher Maxipress M breaks down? The good news is that you don't have to replace the entire clamp. With the Piher sliding bar complete for Maxipress M, you can quickly repair your vise and...
€14.61 *
progressiv-spannzange-rund.jpeg Piher Tension Clamp | round (5.5 cm)
In the workshop, it's often the little things that make the big difference. The Piher Progressive collet is just such a small but powerful tool. The highlights of the Piher Progressive collet: Progressive technology: once actuated, the...
From €8.93 *
gleitbugel-komplett-maxipress-f.jpeg Piher sliding bracket complete | Maxipress F
€26.55 *
piher-auflageflache-fuer-rohre-m6-01.jpeg Piher support flats for tubes M6
In craftsmanship, details are often crucial. With the Piher support surface for M6 tubes, you get an accessory that optimizes your work process and ensures even better results. The special features of the Piher support surface for M6...
€22.75 *
Piher-Pal-Light-Hebelzwinge-Set.jpg Piher LIGHT PAL | Lever Clamp 16cm | Set of 2
- Fixed and sliding stirrups with low weight made of nylon and glass fibre - Rail made of calibrated steel (20x5 mm) - steel brake - Protective caps in thermoplastic rubber (TPR) The set contains 2 Piher Light PAL lever clamps
From €35.90 *
light-pal-hebelzwinge-01.jpeg Piher LIGHT PAL | Lever Clamp 16cm
The Piher PAL Light is not only a simple lever clamp, but also an expanding clamp. With an impressive clamping force of 120 kg, it is the ideal tool for anyone who values precision and versatility. The highlights at a glance: Lightweight...
From €18.25 *
Piher clamping bars model 80 | 100 cm Piher clamping bars model 80 | 100 cm
Rail/Glue Press: 80mm x 42mm Projection: 8 cm Trapezoidal thread
From €198.10 *
Piher Screw Clamp Maxipress M | 12 cm | Set of 2 Piher Screw Clamp Maxipress M | 12 cm | Set of 2
Straight plate with fine, protected thread Ergonomic foldable and exchangeable handle Pressing surface with V-groove for pipes and profiles Recommended for welding, plastering etc. Galvanised steel rod and anti-slip brake on the sliding...
From €37.00 *
Piher screw clamp model XXL 30 cm Piher screw clamp model XXL 30 cm
Especially strong Rail: 60mm x 12mm Projection 19 cm Anti-slip brake Main features: Rolled spring steel bar which gives constant pressure throughout the whole job Nodular cast iron jaws Piston Clamp using a double threaded screw which...
From €158.86 *
2 From 6
Viewed