RS69515 COLD GALVANISING Spray hi.gif

Rocol Cold Galvanising Spray 400ml

COLD GALVANISING Spray is a zinc-rich corrosion protection for long-term protection of metal components that require permanent coating (zinc spray dark).

21,40 € *

inkl. moms. plus fraktkostnader

För närvarande inte i lager - leveranstid ca 10-14 arbetsdagar

Menge
  • RS69515
  • Rocol
  • 5024747695157
  • 0,065 m
  • 0,065 m
  • 0,2 m
  • 0,6 kg
  • Optimaler galvanischer Schutz
For use where more costly plating and coating processes are not justified for cost reasons, or...mer
Produktinformation "Rocol Cold Galvanising Spray 400ml"

For use where more costly plating and coating processes are not justified for cost reasons, or for those large components that cannot be protected against corrosion using a heat treatment process. The product can also be used to repair the surface of galvanized components that have been damaged or scratched.

Features:

  • Temperature range 1800C to 3000C
  • Designed for high temperature applications only below 300 rpm
  • No significant deposit formation - extends part life
  • Evaporates slowly at high temperatures leaving a
  • Molybdenum disulfide film left behind

Directions for use:

HT 70 can be used in normally grease lubricated bearings and applied by high pressure hand grease gun or by spatula. Just enough product is applied to thoroughly wet all running surfaces. Over-application will result in leakage from the bearing.

It is recommended that bearings are cleaned prior to initial application of ROCOL HT 70 to ensure minimal deposit formation.

  • HT 70 is not suitable for application by automatic lubrication systems.
  • Store in a warm place to facilitate hand pumping.
  • Do not use in closed systems that may inhibit the evaporation process

Technical data:

  • Appearance Dark gray viscous liquid
  • Base type Hydrocarbon polymer
  • Solids Molybdenum disulfide
  • Temperature range 1800C to 3000C
  • Viscosity of base fluid at 40°C 13 000 cSt
  • Viscosity of base fluid at 100°C 315 cSt
  • Storage Storage temperature should be controlled from 1 to 40°C.
  • Shell 4-ball (IP 239)(ASTM D2596)

  • Welding load 180 kg
  • Average Hertz load 38 kg

Relaterade länkar "Rocol Cold Galvanising Spray 400ml"
Hersteller Rocol
ROCOL was founded upon the work of Victor Ivanovitch Ragosine, born in Russia, who took a degree...mer
Herstellerinformation "Rocol"
Rocol

ROCOL was founded upon the work of Victor Ivanovitch Ragosine, born in Russia, who took a degree in chemistry at the University of Moscow in 1854.

Based in Leeds, UK, the origins of the company date back to 1878 when Victor Ragosine developed a yellow lubricating oil which he subsequently sold throughout Europe. Unlike other lubricating methods the yellow oil was virtually non-corrosive making it technically superior to other products available.

In 1882, the UK agency manager Ernest Glehn bought out Victor and the Russian parent company and established Ragosine and Company, later to be developed into ROCOL.

Whilst they have made significant advances over the years, their ethos remains the same-to create highly technical products of superior quality to the competition, giving you performance you can trust.

Ytterligare artiklar från Rocol
Senast betraktad