Tracer Mitre Angle | Marking Tool APMA1

The Mitre Angle Measuring Tool is another clever tool with a large array of measuring and marking features useful for every tradesman.

Allowing you to easily take measurements and transfer them into beams, pipes and other workpieces.

Simply and easily mark 90° on your material using the end of the horizontal face, then using the measuring scale mark the depth.

With measurement going up in 1mm increments simply select the correct depth hole, insert a sharp pencil, and run the mitre tool down your material for the desired depth/length!

Using the integrated ruler along the long edge, makes precise measuring easy up to 150mm.

Easy mark angles from 10° to 80° with pre-set measurement of 30°, 45° and 60° lines.

Large, detailed 0-90° protractor along the outside edge, the most convenient way to mark on an angle. This face also includes a smaller detailed protractor 10-80° with a pre-set of 30,45,60° markings.

Needing to mark a 45° mitre angle – couldn’t be simpler with the end of the vertical face made at exact 45° angle.

Accurately mark out dove tails with these pre-set guides set at the most commonly used Sizes of 1:7 and 1:5. Another feature includes a detailed depth measurement to accurately measure the depth of your timber or dovetails.

Mark or find current diameter drill bit with this easy reference scale.