No results were found for the filter!
Starrett Bma2240 Sds Adaptor 240mm Short hexagon shank adapter for core drilling machines For use on a hand drill The size of the shank is 240 mm The size of the shank is 240 millimeters in its length Suitable for an internally tapped chuck on an SDS drill bit
€23.59 *
Starrett A17-38 Locking Arbor Der Starrett A17-38 Verriegelungsdorn mit Hochgeschwindigkeitsstahl-Pilotbohrer 6,35 mm (1/4") und 8,75 mm (11/32") Sechskantschaft, geeignet für Lochsägedurchmesser 32-210 mm (1,1/4"-8,9/32"). Der Dorn rastet fest an der Säge ein,...
€25.13 *
Starrett Xa2 Arbor Shank size 11mm (7/16"). Screw thread 5/8"-18. Fits hole saws from 32-210mm (1.1./4 - 8.9/32") diameter Arbor suitable for use with demanding cutting applications - e.g. Ceramic tiles Quick hitch arbor, allowing instant change of hole...
€41.59 *
Starrett A1-1 Arbor Sds Plus The Starrett SDS Plus Shank allows the arbors to be used in SDS Plus rotary hammer drills with the hammer action facility turned off. Fitted with a 6.35mm (1/4") high speed steel pilot drill. Fits Hole Saw Diameter 14mm - 30mm (9/16" -...
€18.91 *
Starrett A6-1 Kwik Change Chuck SDS Fast, tool-free changes between different sizes and types of Hole Saws and Pilot Drills. Provides a simple method for core ejection and hole enlargement. A6-1 Kwik Change Chuck for use with Hole Saws up to 6" (152mm) diameter. For use...
€36.07 *
Starrett A17-38E Locking Arbor Hole Saw arbor supplied with extended length 6.35mm (1/4") pilot drill. Shank size 8.75mm (11/32"). Screw thread 5/8"-18. Fits hole saws from 32-210mm (1.1./4 - 8.9/32") diameter Arbor suitable for use with demanding cutting applications...
€25.50 *
Starrett A1E arbor with HSS center drill Equipped with a 13 mm longer HSS center drill than standard arbor For hole saw diameters from 14-30 mm. Shank size: 8.75 mm, hexagon. Chuck size: 9.5 mm. Screw thread: 1/2
€12.37 *
Starrett A6 Kwik Change Chuck Fast, tool-free changes between different sizes and types of Hole Saws and Pilot Drills. Provides a simple method for core ejection and hole enlargement. A6 Kwik Change Chuck for use with Hole Saws up to 6"/152mm diameter.
€27.05 *
Starrett A19 "Oops" Arbor The A19 'Oops' Arbor is for use in conjunction with either the A1, A2 or A10 type hole saw arbors (e.g. A1-1, XA2, A1E etc). Replacing the pilot drill, the 'Oops' Arbor allows diameters to be enlarged by attaching a saw of the same size...
€19.82 *
Starrett A10E Arbor Fits hole saws from 32-210mm (1.1./4 - 8.9/32") diameter Arbor suitable for use with MPH Hole Saws Quick hitch arbor, allowing instant change of hole saw without tools and without removing the arbor from the chuck. Fits Hole Saw Diameter...
€19.53 *