No results were found for the filter!
Alfra ROTABEST®-HSS-Co RQX core drill Weldon shaft 19mm, 2 carrier areas Inner bore 6.35mm coated bevel: with pre-cutter and trimmer Suitable for: ALFRA-Rotabest, BDS, Bux, Ruko, Magnetor, Euroboor, Universal, Nitto, Jancy, Hougen, Magnetron, Promac, Rotabroach, and all...
From €24.35 *
FAMAG Bormax 2.0 8 mm ...the ultra fast... WS Bormax® 2.0! Center point with cutting geometry. Two offset grooved main cutting edges (from Ø 11 mm) and the toothed circumferential cutting edge with longitudinal grooves mean that significantly less feed force is required and...
From €19.74 *
ALFRA Rotabest Core Drills HSS-Co-Eco 30 mm... With Weldon shank 19.0 mm, 2 driving surfaces. Inner bore: 6.35 mm, for cutting depth ø 110 mm: 8 mm Steel quality: special super-high-speed steel Cobalt Connection: with pre-cutter and re-cutter Suitable for: ALFRA-Rotabest®, BDS, Bux,...
From €20.42 *
FAMAG Auger Bit, Lewis Pattern 1080x14mm twist... Milled version form "Lewis" with round spiral groove, thread tip, main cutting edge and top quality taper tap. Version with stepped head and hexagonal shank (from Ø 8 mm) Alloyed tool steel. Due to precise production also suitable for...
From €105.58 *
FAMAG Auger Bit, Lewis Pattern 1000x12 mm twist... Milled version form "Lewis" with round spiral groove, thread tip, main cutting edge and top quality taper tap. Version with stepped head and hexagonal shank (from Ø 8 mm). Alloyed tool steel. Due to precise production also suitable for...
From €81.18 *
FAMAG Auger Bit, Lewis Pattern 1000x34 mm twist... Milled version form "Lewis" with round spiral groove, thread tip, main cutting edge and top quality taper tap. Version with stepped head and hexagonal shank (from Ø 8 mm). Alloyed tool steel. Due to precise production also suitable for...
From €148.69 *
FAMAG Drill-Countersink-Set with bit shank HSS... For lightning-fast change in bit holders. Drilling and countersinking in a single operation in soft wood and to a certain extent in European hard wood. Drill HSS, countersink WS.
From €13.62 *
FAMAG Formwork Drill Bit, Cylindrical Shank 600 mm For drilling through the inner and outer formwork boards in a single operation, as well as drilling through wooden ceilings and floors for installations in the renovation of old buildings.
From €10.00 *
FAMAG Screw Auger, Lewis pattern 600x8mm For deep hole drilling in softwood and to a limited extent also in European hardwood Material: Alloy tool steel.
From €20.08 *
FAMAG BFormwork Drill Bit, SDS-plus 600 x 10 mm For drilling through the inner and outer formwork boards in one operation, as well as drilling through wooden ceilings and floors for installations in the renovation of old buildings. 1200 - 2500 rpm. e.g. Ø 22 mm 1200 rpm in formwork...
From €21.70 *
Alpen Multi-purpose drill set Profi Multicut... - Shank: 6.3 mm (1/4") hexagonal - Surface shot peened - Consisting of: ø-mm: 4, 5, 6, 8, 10 - Plastic case
€40.36 *